Metallurgical Trinocular Inverted Microscope 80X Objective 5 Holes Eyepiece – LT/DM2000X

Descripción

Metallurgical Trinocular Inverted Microscope 80X Objective 5 Holes Eyepiece
Trinocular Inverted Optical Metallurgical Microscope with High Quality Camera

TECHNICALSPECIFICATIONS

EYEPECE(S)

• Extended EWF 10x/20 mm eyepieces, Ø 23.2 mm tubes.(Ø 30.0 optional)
• Eyepieces can be secured to the tubes

HEADS

• Trinocular Siedentopf type heads are with 30° inclined tubes, interpupillary distance from 48 to 75 mm and is equipped with diopter adjustment(s).
• The trinocular head comes with a Ø 30 mm photo port.
• An optional ergonomic titling head (0:100 50:50) are also available (optional)

NOSEPIECE
• Revolving and reversed nosepiece for 5 objectives

OBJECTIVES

All optics are anti-fungus treated and anti-reflection coated for maximum light throughput

Infinity plan Metallurgical LWD objectives 5x/ 0.13 (optional) / 10x/0.25, 20x/0.40, S50x/0.70, S80x/0.80, S100x/0.90(dry) (optional)

STAGE

•Mechanical stage 180 x 155 mm ceramic stage with integrated 80 x 50 mm mechanical stage protects with a very tough ceramic surface, against marks and scratches.The surface also ensures stray light not to be reflected from the stage into the objective

FOCUSING

• Coaxial coarse and fine adjustments, 100 graduations, 1 μm per graduation, 100 μm per rotation, total travel approximately 14 mm.
• Supplied with an adjustable rack stop to prevent damage to sample and objectives.
• The coarse adjustments are equipped with friction control

ILLUMINATION

• 12V 50W adjustable halogen illumination with internal 100-240 V power supply
• The innovative design offer larger apertures, allowing the optical system of the microscope to produce images at higher resolutions,
very close to the theoretical diffraction limit of the optics.
• Other benefits of the DM2000X is the low energy consumption and a long operating lifetime

CONFIGURATION LIST